Showing products 1-30 / 80


9products tire pressure sensor replacing plug set.

Eight aluminum plugs and holding nuts included to a set.

Porsche 928

563,71 €
(699,00 €, Incl. VAT)

9products torque tube bearing set.

Four anodized aluminum bearing blocks included to a set.

Porsche 944 / S / S2 / Turbo ’82-91

378,23 €
(469,00 €, Incl. VAT)

IMS-bearing assembly. Custom high precision ball bearing and upgraded gasket to prevent leaking.

Porsche 997 '05-

Porsche 987 '05-

310,00 €
(384,40 €, Incl. VAT)

Lightweight wheel spacer for all standard, racing and performance use. Gives OE look on outside but it's total performance. Spacers has technical lightening pockets inside.

For all Porsche models using wheel bolts.  

Porsche 986 Boxster

Porsche 996

Porsche 997

Porsche 991  

80,00 €
(99,20 €, Incl. VAT)
Lower Control Arm End Bushing, Spherical Bearing

Lower control arm end bushing mount with spherical bearing.

Porsche 986 Boxster

Porsche 996 ’97-05

219,00 €
(271,56 €, Incl. VAT)

Underdrive pulley, 9products.

Porsche 996 GT2 / GT3 / Turbo

Porsche 997 GT2 / GT3 / Turbo

319,93 €
(396,71 €, Incl. VAT)

Track rod locking set. The rear axle eccentric bolts are often dislocated especially in racing conditions. This locking set enables stationary fastening of rear axle track rod.

Porsche 996 C2 / C4 ’98-05

Porsche 996 Turbo ’01-05

Porsche Boxster / Boxster S ’97-04

76,61 €
(95,00 €, Incl. VAT)

Rear and front axle lower control arm locking set. The rear axle eccentric bolts are often dislocated especially in racing conditions. This locking set enables stationary fastening of front and rear axle lower control.

Porsche 996 C2 / C4 ’98-05

Porsche 996 Turbo ’01-05

Porsche Boxster / Boxster S ’97-04

79,03 €
(98,00 €, Incl. VAT)

This is our new 60mm extender for a factory airbag steering wheel. It is a must for all tall drivers for the driving position to be optimal. This part is suitable for 986 Boxster’s, series 996 and 993.


The product does not have TUV-certificate. Use off-road or track / racing only.

Porsche 993 (all models)

Porsche 986 Boxster (all models)

Porsche 996 (all models)

448,33 €
(555,93 €, Incl. VAT)

Drop link kit for the rear sway bar.

Porsche 996 Carrera 2 / 4 ’99-05

Porsche 996 Turbo ’01-05

192,74 €
(239,00 €, Incl. VAT)

Rear axle solid bushing set.

Porsche 993

476,15 €
(590,43 €, Incl. VAT)

Lower control arm solid bushing. One set per control arm.

Porsche 986 Boxster

Porsche 996 ’97-05

116,63 €
(144,62 €, Incl. VAT)

Water sealed  trailing arm spherical bushing. Sold as a pair.

Porsche 996 C2 / C4 ’98-05

Porsche 996 Turbo ’01-05

Porsche Boxster / Boxster S ’97-04

255,73 €
(317,11 €, Incl. VAT)

The brake caliper adapter set is for installing big 'M030' front brakes to replace the cast iron brake calipers.

The four piston aluminum front calipers and 304 × 32 mm rotors could be found from following Porsche models:


Porsche 944 S2 and Turbo with option M030

Porsche 968 with option M030

Porsche 928 GT / S4



Reference code for the left and the right front rotors: 928-351-043-60 and 928-351-044-60.


Note: 304 × 32 mm brake rotors need to be installed with brake rotor centering ring 9P-44rc-103.

Porsche 944 ’87-89

Porsche 944 S

200,81 €
(249,00 €, Incl. VAT)

Brake rotor centering ring. Use this item to install any series 996- or 997-brake rotor to a stock front hub of Porsche 944 ’87-91 or 968 ’92-95. Sold as a pair.


Porsche 944 / S / S2 / Turbo ’87- (not for M030)

Porsche 968 (not for M030)

97,74 €
(121,20 €, Incl. VAT)

IMS-bearing assembly. The kit covers both narrow and wide IMS bearing. Full CrMo construction, custom high precision ball bearing and upgraded gasket to prevent leaking.

Technical data / product sheet and installation instructions:

Installation instructions

Technical data sheet

Porsche 986 Boxster '96-04

Porsche 996 '99-04

529,65 €
(656,77 €, Incl. VAT)

The brake caliper adapter set is for installing massive Porsche 996 GT2 / GT3 or Turbo type 4- or 6-pot front brake calipers to series 944 or 968.

Use 330 × 34mm Turbo brake rotor with 4-pot caliper. Reference code for the rotor: 996.351.409.04 and 996.351.410.04.

Use 350 × 34mm Turbo brake rotor with 6-pot caliper. Reference code for the rotor: 997-351-405-01 ja 997-351-406-01.

Porsche 944 S2 / Turbo ’87- (not for M030)

Porsche 968 (not for M030)

249,00 €
(308,76 €, Incl. VAT)

This adapter kit is for upgrading 944, 968 or 964 front brakes to Big Red or M030 calipers and rotors. Sold as a pair with bolts.

Use 304 × 32mm brake rotor with following caliper models: 944 / 968 M030, 928 GT / S4 or 993 C2 / C4. Reference code for the rotors: 928-351-044-60 and 928-351-043-60.

Use 322 × 32mm brake rotor with following calipers models: 928 GTS, 964 RS / Turbo,Porsche 993 Turbo. Reference code for the rotors: 965-351-046-00 ja 928-351-045-00.

Porsche 964 C2 / C4

Porsche 944 S2 / Turbo ’87-

Porsche 968

196,96 €
(244,23 €, Incl. VAT)

Flywheel bolt shim is used when installing aluminum flywheel.

Porsche 944 / S / S2 / Turbo

Porsche 968

30,33 €
(37,61 €, Incl. VAT)

Oil Cooler Adapter

9P-911oca

Oil cooler adapter for using 901- cooler in newer 911 cars.

Porsche 911

77,52 €
(96,13 €, Incl. VAT)

Brake rotor centering ring. Use this item to install 304 × 32 mm or 322 × 32 mm brake rotor to a stock front hub of Porsche 944 ’87-91 or 968 ’92-95. Diameter 103mm. Sold as a pair.

Porsche 944 / S / S2 / Turbo ’87- (not for M030)

Porsche 968 (not for M030)

115,94 €
(143,77 €, Incl. VAT)

Brake rotor adapter. With the adapter you can use cheaper 996 Turbo brake rotor in the front axle.

Reference number for the brake rotor: 996-351-409-04 ja 996-351-410-04.

Porsche 996 GT3

30,12 €
(37,35 €, Incl. VAT)

Turbo flange. 12mm stainless steel (AISI 304).

 

Porsche 996 Turbo

Porsche 997 Turbo

36,25 €
(44,95 €, Incl. VAT)

Rear brake caliper spacer for 350mm rotor.

The rear brakes in 996 and 997 models using 330mm rear rotors are easy to upgrade into similar to 997 Turbo. You will just need this adapter set and a pair of 350mm rotors.

Reference code for the brake rotors: 997-352-405-02 and 997-352-406-02.

Porsche 996 C4S / Turbo

Porsche 997 Carrera S / C4S

144,35 €
(179,00 €, Incl. VAT)

Exhaust flange, 12mm stainless steel (AISI 304).

Porsche 944 / Turbo (2,5L 8V)

108,98 €
(135,13 €, Incl. VAT)

Spring plate bushing set.

Porsche 924 ’76-

Porsche 944 / S / S2 / Turbo

Porsche 968

120,16 €
(149,00 €, Incl. VAT)

The brake caliper adapter set is for installing massive Porsche 996 GT2/GT3 or Turbo type rear brakes to series 944 or 968. The brake calipers need to be modified in a machine shop. Contact sales for additional information cencerning the modification.


Reference code for the Turbo and GT2/GT3 330 × 28 mm rear brake rotors: 996.352.405.01 and 996.352.406.01.

Porsche 944 / S / S2 / Turbo ’87-

Porsche 968

249,00 €
(308,76 €, Incl. VAT)

Shift Rod

9P-944-424-141-00

Shift rod.

Porsche 944 / S / S2 / Turbo

Porsche 968

104,99 €
(130,19 €, Incl. VAT)

A-arm bushing, front. One set for one a-arm.

Porsche 911 ’68-89

57,80 €
(71,67 €, Incl. VAT)

The brake caliper adapter set is for installing emergency brake shoes to series 944 or 968 with 996 brake rotors. The set comes with two steel adapter plates for emergency brake cables.
Reference code for the Turbo and GT2/GT3 330 × 28 mm rear brake rotors: 996-352-405-01 and 996-352-406-01
Reference code for the brake shoes: 997-352-993-01

Porsche 944 / S / S2 / Turbo ’87-
Porsche 968

489,00 €
(606,36 €, Incl. VAT)

2024 © 9prodocts